Articles in month: September, 2009

How it Will Benefit Us All: Gasification

If you search for gasification and terms like “wood stove” on video sharing sites these days you will see demonstrations of wood being burnt in little stoves which seem to something almost miraculous and quite different from our idea of wood as a fuel. These little boilers light rapidly, produce no detectable smoke after the initial lighting and firing, and burn very hot.

So what is the technique which is being used, and how might it help us all in weaning society off fossil fuels?

What you have seen is a method of gasification. It differs from combustion in that it uses just 20% to 30% of the air or oxygen necessary for complete fuel combustion. During gasification, the amount of air supplied to the gasifier is carefully controlled with the effect that only a small part of the fuel burns completely. Trials of this process have illustrated that up to 70% of the energy value of the fue used can be recovered as what is known as synthesis gas, or syngas. This producer gas can also be used for various applications similar to natural gas.

This is a part of the magic, and not one really shown in the YouTube type videos, but it makes this method even more useful. This is due to the fact that syngas can be put to useful work, in both drying the feed fuel prior to gasification and after collection and storage it can be used as a fossil fuel replacement, and renewable energy source. When a gasification plant also includes Combined Heat and Power (CHP) and/or electricity export from the site, the gains are even more impressive.

Gasification in addition promises to be the most efficient long-term solution for capturing carbon while utilizing these valuable feedstocks, and storing the CO2 for very long priods, to reduce or halt global warming.

Gasification of wood and wood-type residues and waste in fixed bed or fluidised bed gasifiers with subsequent burning of the gas for heat production is has become state of the art with designers of thes systems working hard to gain the absolute maximum efficiency out of these systems.

These wood gasifiers which are located primarily in the Scandinavian countries are used almost entirely for space heating heat generation. Gasification of biomass is the renewable fuel system preferred by many, and can be defined as the thermal conversion of solid biomass to gaseous fuel.

Gasification has been around for over a hundred years, but the benefits of biochar are only now being discovered. Furthermore, it is still a wide-open field.

Before electric lighting was available in cities there were street lamps fuelled by gasified coal. It is easy to forget that the process has been reliably used on a commercial scale worldwide for more than 50 years in the refining, fertilizer, and chemical industries, and for more than 35 years in the electric power industry. More than 75 companies involved in the development, licensing, and use of these technologies as well as engineering, construction, equipment manufacturing and production of synthesis gas by gasification from coal, petroleum coke, heavy oils and other hydrocarbons.

Gasification has been proven to be a viable technology for CO2 capture and reducing SOx, NOx, particulate matter, and mercury emissions from coal and petcoke-fired power plants, synthetic fuels production, and chemical facilities.

Plants in this category have been capturing carbon dioxide for several decades in chemical plants in China and the United States. It also has potential contributions to make to both transportation and electrical power energy markets. With ongoing concerns about the price and availability of oil, populous countries like the U.S. gasification has proven to be in high demand and quite successful. However, it can also be used in conjunction with gas engines and gas turbines to obtain a higher conversion efficiency than conventional fossil-fuel electric power generation. Gasification can help meet renewable energy targets, address concerns about global warming, and contribute to meeting global environmental targets.

Steve has built a great web site where there is a lot more information about gasification. This is a hot subject indeed for this technology which has become an essential read for all those in alternative energy and interested in taking action to reduce the impact of climate change.

Technology Environment News 12-14-07 of Dekalb Academy

The Perfect Solar Storm - From A Global Disaster

The average solar cycle lasts for eleven years. The cycle includes a minimum of solar activity and a maximum. The sun is unusually quiet right now and has been for some time but there should be an increase in solar activity at some point in the near future.

The best current scientific estimate for the next solar maximum is 2012. If this estimate is correct, there is still a few years to try and prevent the potential of a future global disaster. A disaster that would begin on the surface of the sun and could end with tragedy on earth.

The surface of the sun is a mass of plasma that contains highly charged energy particles. Once in a while, some of these particles escape the suns surface and a mass of plasma travels through space on the solar wind. This process is known in scientific terms as a coronal mass ejection but it can also be called a solar storm.

A disaster for the planet would occur if a solar storm reaches and hits the earths magnetic shield in just the right way. If it were to happen, millions of people would lose their lives and the planet would be thrown into chaos as the technology that has become crucial to every day living suddenly gets taken away.

The perfect solar storm will start with skies that will be filled with a bright red aurora. However, soon everything will become dark as every electric bulb becomes devoid of light. The storms damage to the electric grid would be caused through an increased DC current. The runaway current would knock out and melt hundreds of key transformers within minutes, cutting off power for hundreds of millions of people.

Those damaged transformers cannot be repaired only replaced and installing a replacement takes a well-trained crew a week or more. Its incredible to consider that most major electrical utilities have just one or two suitably trained crews available for these type of transformer repairs. In addition, there are only a few spare transformers available and the rest would have to be built to order. Its a process that can take nearly twelve months.

So, the power blackout from the perfect solar storm would last for months but its not just the absence of light that would be the problem. Drinking water would still come through the taps for maybe half a day after the storm. With no electricity to pump water from reservoirs, there would be no more tap water after that.

The electric grid is necessary for almost all natural gas and fuel pipelines to operate. As a result, fuel and natural gas will quickly run out and without food delivery, supermarket shelves would soon become bare. Soon it would become necessary to control public hysteria and the military would have to be called in to restore civil order

There will be no power for heat, cooling or refrigeration until the grid is repaired and after their back up generators run out, hospitals will not be able to provide modern healthcare. A lack of water and food will result in spreading disease but Pharmaceutical companies without electricity will not be able to produce the necessary medicine.

Of course, many will say that this is absurd science fiction and it cannot happen here, but this chilling disaster scenario was outlined in a report released last January (funded by NASA) by the US National Academy of Sciences (NAS).

The fact is that a storm from the sun did hit the earths magnetic field in 1859. The effect of this solar storm on earth became known as the Carrington Event. The event was named after the amateur astronomer who observed two patches of intensely bright and white light emanating from a large group of sunspots that may have produced the event.

The solar storm that produced the Carrington Event created a red aurora across the planet from the poles to the tropics. Throughout the world, telegraph systems crashed, machines burst into flames, and electric shocks rendered operators unconscious. Compasses and other sensitive instruments reeled as if struck by a massive magnetic fist. It can happen again and the technology of the planet is now much more advanced and vulnerable.

The next solar maximum is estimated to return in about three years. A global disaster from the perfect solar storm can be prevented with proper contingency planning. There is still time for the government to be proactive and prepare to avoid disaster by creating a potential response to quickly repair the damage to the electric grid from the perfect solar storm.

James William Smith has worked in Senior management positions for some of the largest Financial Services firms in the United States for the last twenty five years. He has also provided business consulting support for insurance organizations and start up businesses. He has always been interested in writing and listening to different viewpoints on interesting topics. Visit his website at http://www.eworldvu.com or his daily blog at http://www.eworldvublog.blogspot.com

Green Technology World

Spanish And Solar: A Model To Follow Or A Cautionary Tale? « PA …

The green environmentalists have been saying, and will continue to say that Solar power can fill the gap to supply electrical power that used to be supplied from coal fired sources. As I have said all along, this is something that just …

Solar roadways: A fantastic, but futile, idea?

One small Idaho company believes they’ve found the solution to US renewable energy: solar roadways.

The Do It Yourself Home Solar Power Kits

It has been found in the current times that solar power is acquiring popularity among the mass to a great extent. Even though using solar power is quite known, yet different people use it for various purposes. Making your personal solar …

China Trade Information » Mixed feelings over US solar project

First Solar Inc, the world’s leading solar modules maker, earlier this month announced an agreement with the Chinese government to build a 2-gigawatt solar power plant in Ordos in Inner Mongolia Autonomous Region. …

Inhabitat » MAD Unveils Taichung Convention Center With Solar Eco-Skin

A Green Design Blog, Sustainable Design Blog, Future-forward design for the world you inhabit - your daily source for innovations in sustainable architecture and green design for the home.

Saving Energy with Your PC

Green and Clean Computing

Little thought may be given to the energy consumption of computers, but as more and more computers are purchased each year, it is not just the number of computers that forces increased energy consumption but the way in which computers are being used that adds to the building energy burden. Research has shown that most computer desktops are not being used a great deal of the time they are running and are left on for long periods of time. As with other forms of energy consumption, electricity is wasted when it is not being used and this burns fossil fuels that emit carbon dioxide into the air and cause smog, acid rain and other detrimental environmental side effects.

The typical desktop computer consists of a system unit which houses the central processing unit (CPU), a monitor and a printer. The CPU may require 100 watts of electrical power; the monitor, which may be 15 to 17 inches, may require another 50-100 watts; a laser printer can use as much as 100 watts or more while ink printers use as little as 12 watts while printing. The cost for operating a 200 watt system all day and night, everyday, would be $125 annually, while the cost of operation for normal business hours of 40 hours per week would range around $30 annually. Considering the tremendous benefits derived from using computers, this figure may not appear extensive, but when multiplied by the many computers used on a daily basis in this country, the total grows phenomenally.

There are many ways to reduce personal computer energy consumption. Computers, printers and monitors can be turned off when not in use. Many years ago, it was considered harmful to the computer if it were turned on and off periodically during the course of a day. However, the internal circuitry of personal computers is designed to be protected from power damages that might result from on and off switching. Doing so will not substantially affect the computer’s useful life.

The use of screen savers wastes energy and should not be used. They go back to the days when, if not used, images would be ingrained on screens if they remained on too long, but updates in technology have long made the use of screen savers unnecessary.

The United States Environmental Protection Agency has also developed technology for computers and monitors that can be programmed to automatically power down to a lower power state when not in use. This “sleep mode” can reduce energy consumption by 60% to 70% and these “Energy Star” computers serve to gain efficiency without any loss in computing performance.

Green computing extends beyond the personal computer to the use of related devices and materials. For example, paper waste can be reduced by printing as little as possible and only when necessary, recycling waster paper, using electronic mail instead of faxing to eliminate the need to produce a hard copy, and trying to print on both sides of the page when possible. In addition, printer and toner cartridges can be recycled. Although this is a practice that has been discouraged in the past by printer and toner cartridge manufacturers, such recycled cartridges save resources and reduce pollution and solid waste. Disposing of electronics as well can be done through recycling agencies to reduce waste and provide for recycling of functional equipment.

Finally, green computing also means not buying new equipment unless there is a real need for it. Close investigations can be made regarding upgrading hardware or software before purchasing a new computer. However, if the determination is made that a new computer system should be purchased, there are “Energy Star” computers, monitors and printers on the market. In addition, ink jet printers use 80% to 90% less energy than laser printers and soon, even “Green Computers” will reach the marketplace for sale.

Visit http://www.OCRuggedLaptops.com for more information about the rugged laptop industry.

Gadgets of Solar

Real Environmental Change is So Needed in Our Thinking, Mindset, Attitudes, and Concern For Others!

Global Warming and Climate Change have been frequent phrases used over these past few years, and in various places there has almost been a panic. We hear of National Leaders using words like Saving the Planet, as if there was anything any man could do to save, rescue or prolong what Almighty God has created.

This is a time for not being afraid. Everything is being shaken - climate - moral - spirituality - the banks - investments - the Money Market. This is exceedingly serious.

Three times we read in the Word of God - in the Old Testament and in the New Testament too - that this present world will perish - that it will wear out like a garment - and that God will roll it up like a worn out jacket that is ready for discarding and dispense with it. Of course, we also read that there will be a new heaven and a new earth, and it will all be very much centred on Jerusalem.

Now, this is not a crank creed or extremist belief. This is mainstream Bible revelation.

Yes, there is a dilemma in as much as we wonder what we are to do just now, and that is where helping the poor and ministering to the poor is vitally important.

Invest in the poor. Invest in ministries that minister to the poor. Having been in Uganda and Kenya over these past years, and having recently returned from Kenya and from the poorest parts of Nairobi and Kisumu and Bungoma, there has been a slight degree of comfort in the knowledge that we have been able to give a little to alleviate the plight of those who are truly poor.

Normally, when we say we have nothing in our pockets, there might be a few Pounds or a few Dollars in our pockets, but when they say they have nothing the have NOTHING!

Jesus Christ was committed to all types of people and came to save sinners - those who were rich and those who were poor - but He gave us the task of caring for and looking after the poor, knowing that we will never be able to complete that task. That will not be completed until Jesus Christ returns.

Yes, we have to be concerned about our carbon footprint but we must not get all this out of proportion. We will not save and rescue the planet, and there is no point in praying against what the Word of God dictates will happen one day.

And yes, much of the suffering among the poor is caused by man’s sin.

There is plenty of food in the world, but man will not share it as he ought to - nor will he permit the relief agencies to do what they can.

There are millions who could be helped within two or three months with food, water, and medicine, if only those in Governments would permit people with a heart for the poor to work and serve and use their talents and energies in a positive productive manner.

Having done that, man can then start to work on the drainage and sewers, and mosquito nets for all who need one!

Injustice is one root cause of so much suffering, coupled with greed, corruption and rebellion.

And, we do not have to look at Africa to see this clearly. It has been on-going in the banks and insurance companies and the big commercial concerns over these past years and all this is coming to light just now. Jesus Christ taught that everything which was done in secret would one day be shouted from the house tops - and that is happening too.

The problem is not the icecaps but the cold calculating corruption in the hearts of men. Environmental abuse begins in the heads and minds of selfish self-centred man.

And yes again, we will do whatever we can to minister to the poor, which includes challenging those poor souls who have creamed of Millions and even Billions of Pounds and Dollars.

Do they not believe that one day they will have to stand before the Judgement Seat of Almighty God and answer for their words, their deed and decisions.

Yes - make a difference. Do what you can to challenge those who have made such a mess of things and get them to clean up their comfortable lives and their distorted thinking and demonstrate such repentance by serving the poor and ministering to their needs.

Sandy Shaw.

Sandy Shaw is Pastor of Nairn Christian Fellowship, Chaplain at Inverness Prison, and Nairn Academy, and serves on The Children’s Panel in Scotland, and has travelled extensively over these past years teaching, speaking, in America, Canada, South Africa, Australia, making 12 visits to Israel conducting Tours and Pilgrimages, and most recently in Uganda and Kenya, ministering at Pastors and Leaders Seminars, in the poor areas surrounding Kampala, Nairobi, Mombasa and Kisumu.

He broadcasts regularly on WSHO radio out of New Orleans, and writes a weekly commentary at http://www.studylight.org entitled “Word from Scotland” on various biblical themes, as well as a weekly newspaper column.

His M.A. and B.D. degrees are from The University of Edinburgh, and he continues to run and exercise regularly to maintain a level of physical fitness.

Sandy Shaw
sandyshaw63@yahoo.com

2008- Granny Arrested/Greenest car

Solar Protons + Lunar Dust = Lots of Water on the Moon | 80beats …

Feature | While it’s not quite time to build the first lunar swimming pool, scientists do report that they’ve found the chemical signature for water all over the moon’s s.

OilVoice | Statkraft Acquires 8 Solar Power Projects From Italian …

OilVoice.com - the web’s favourite Oil and Gas site.

Coloured Solar Panels Are Green.. And Pink! And Blue! And Yellow …

Architecture is relying more and more on the creation of buildings that are completely self dependent when it comes to power. This leaves the buildings with.

Guiding Light Mailbox is solar powered » Coolest Gadgets

Guiding Light Mailbox is solar powered on Coolest Gadgets.

Climate Change Fraud - Because the debate is not over - Greens Vs …

The ditching of a desert renewable-energy project shows just how difficult it is to maintain our standard of living while pleasing the purists. Maybe we shouldn’t even try. Anyone who has set foot on.

Green Computing

Green and Clean Computing

Little thought may be given to the energy consumption of computers, but as more and more computers are purchased each year, it is not just the number of computers that forces increased energy consumption but the way in which computers are being used that adds to the building energy burden. Research has shown that most computer desktops are not being used a great deal of the time they are running and are left on for long periods of time. As with other forms of energy consumption, electricity is wasted when it is not being used and this burns fossil fuels that emit carbon dioxide into the air and cause smog, acid rain and other detrimental environmental side effects.

The typical desktop computer consists of a system unit which houses the central processing unit (CPU), a monitor and a printer. The CPU may require 100 watts of electrical power; the monitor, which may be 15 to 17 inches, may require another 50-100 watts; a laser printer can use as much as 100 watts or more while ink printers use as little as 12 watts while printing. The cost for operating a 200 watt system all day and night, everyday, would be $125 annually, while the cost of operation for normal business hours of 40 hours per week would range around $30 annually. Considering the tremendous benefits derived from using computers, this figure may not appear extensive, but when multiplied by the many computers used on a daily basis in this country, the total grows phenomenally.

There are many ways to reduce personal computer energy consumption. Computers, printers and monitors can be turned off when not in use. Many years ago, it was considered harmful to the computer if it were turned on and off periodically during the course of a day. However, the internal circuitry of personal computers is designed to be protected from power damages that might result from on and off switching. Doing so will not substantially affect the computer’s useful life.

The use of screen savers wastes energy and should not be used. They go back to the days when, if not used, images would be ingrained on screens if they remained on too long, but updates in technology have long made the use of screen savers unnecessary.

The United States Environmental Protection Agency has also developed technology for computers and monitors that can be programmed to automatically power down to a lower power state when not in use. This “sleep mode” can reduce energy consumption by 60% to 70% and these “Energy Star” computers serve to gain efficiency without any loss in computing performance.

Green computing extends beyond the personal computer to the use of related devices and materials. For example, paper waste can be reduced by printing as little as possible and only when necessary, recycling waster paper, using electronic mail instead of faxing to eliminate the need to produce a hard copy, and trying to print on both sides of the page when possible. In addition, printer and toner cartridges can be recycled. Although this is a practice that has been discouraged in the past by printer and toner cartridge manufacturers, such recycled cartridges save resources and reduce pollution and solid waste. Disposing of electronics as well can be done through recycling agencies to reduce waste and provide for recycling of functional equipment.

Finally, green computing also means not buying new equipment unless there is a real need for it. Close investigations can be made regarding upgrading hardware or software before purchasing a new computer. However, if the determination is made that a new computer system should be purchased, there are “Energy Star” computers, monitors and printers on the market. In addition, ink jet printers use 80% to 90% less energy than laser printers and soon, even “Green Computers” will reach the marketplace for sale.

Visit http://www.OCRuggedLaptops.com for more information about the rugged laptop industry.

Enhance Your Environment with a Solar Water Fountain | THM

In recent years, however, the development of relatively inexpensive solar panels has made solar power a practical option for many everyday devices. Since their introduction, solar water fountains have become very popular for both …

Brightly Colored Solar Panels With Less Silicon Harness Indirect …

If you love solar power and solar products, but fear the impact shade from cloudy or dark days may have on your panels, your fears conquered soon. GreenSun Energy Ltd. has found a colorful and innovative new way to harness indirect.

Why Wind Power is Better Than Solar Power â?? We Compare Wind Power …

Why Wind Power is Better Than Solar Power â?? We Compare Wind Power and Solar Power So you want to install some renewable energy for your home and have come to.

Peak Energy: UBS Report: Future Bright for Solar Thermal

The holy grail of the C.S.P. industry, meanwhile, is the recently announced Desertec Initiative, a monumental European/Middle Eastern plan to build vast solar reflector systems (and wind farms) in the north-African desert over the next …

BrightSource dropped Controversial plan for solar thermal power …

CEOWORLD Magazine- A Daily and Breaking Business News, Financial News, Stock Market Analysis, Technology & Global Headline News, Magazines and Journal…

Some Eco-Friendly Green Thoughts

How often when you go to the grocery store are you asked if you want paper or plastic grocery bags?  Well the best answer to that would be NEITHER.  To keep the U.S. stocked with paper and plastic grocery bags, takes about fourteen million trees and twelve million barrels of oil every year! Investing in a few reusable bags makes a lot of sense.

Think about those little paper receipts you get at the gas pump and the ATM machine.  If all people would simply note it in their checkbook, or in a small notebook when they made a purchase or withdrew money, it would be saving enough paper to encircle the globe fifteen times!

If every American would by one roll of recycled paper towels instead of the others, it would save over half a million trees. And how about turning the car off when you are waiting for someone, in the drive-thru lane  or stuck in a huge traffic jam?  When a car idles for more than a minute it is polluting the air and wasting your gas.

Cordless phones are replacing conventional phones.  But think about it… sitting in a recharging cradle and using up your electricity  twenty-four hours a day and every day of the week! Replace one or two cordless phones with your old conventional ones and you’ll save energy.  The old fashioned ones use only a tiny bit of electricity, and will work when the power is off. If you insist on the convenience of cordless phones, make sure the ones  you do get are Energy Star-rated, for high energy efficiency.

Lisa is a freelance writer with a specialty in Internet content and SEO articles. She has written thousands of articles, hundreds of ebooks and thousands of website pages and related content. She has also authored her own books and works as a consultant to other writers, Internet marketers and Internet businesses. Professional wordsmith for hire: gamer, wife, mother, entrepreneur, published poet, co-owner of game guides company (http://www.liti4.com), public speaker and Internet business consultant. You can learn more or follow Lisa’s blog from her website: http://www.freelancewriter4hire.com

Fort Cherry Schools of Technology Dir.

Electronics Recycling

Society’s technological advancements have grown significantly over the years. Electronics devices such as telephones, cell phones, radios, CD and DVD players, televisions, and computers are products that are used in every household. These items are just a few of the many electronic devices that can cause serious environmental damage due to their toxic components. Electronics that are in need of disposal are referred to as e-waste, or electronic waste. Because of the advancement of electronic products, there has been a growing concern about the hazards of electronic waste. Some of these concerns include: improper disposal of toxic materials, health and safety concerns for people disposing of these items, as well as dangers to the soil and water supply. For instance, electronics are made using a considerable amount of toxic substances such as lead, cadmium, aluminum, zinc, copper, and plastics which can all leak poisonous material in the ground and water. These environmental concerns have resulted in the establishment of electronic recycling facilities and industries who take old electronics such as computers for the purpose of recycling and safe disposal.

Electronics containing materials such as metals, plastic, are valuable to the recycling companies. Disposing of electronics through a recycling company will result in fewer electronic devices going into landfills and lower carbon emissions.

Recovering Raw Materials: Recycling electronics involves recovering raw materials from the electronic equipment. Materials such as steel, copper, wires, aluminum, brass, plastics, glass,etc., are extracted and sold to smelters so they can create raw materials. Depending on the type of metal being extracted, they can be processed and used in products required by such businesses as the steel, construction and cement industry. Plastics and wood can be used as fuel to provide heat to industrial furnaces which converts to steam. Metals such as copper are sold to metal refineries.

Plastics: Plastics from such items as computers, computer mice, and keyboards, are sent through shredding processes and machine sorted. They are then sent to other recyclers for further processing.

Larger Electronics: Items such as televisions and computer monitors are dismantled by hand. The leaded glass cathode ray tubes are removed and disposed of safely. Plastics, copper, and circuit boards are removed, separated, and processed.

Hazardous Items: Toxic items are removed from electronic devices and disposed of safely. Toxic substance can include leaded glass, rechargeable batteries, non-rechargeable batteries (i.e.alkaline, lead acid, cell batteries) mercury in lamps and switches, parts containing polychlorinated biphenyls, as well as ink and toner cartridges. The remaining non toxic materials are processed and the recyclable materials are recovered. The materials are shredded and separated according to type. For instance, they can be divided into such materials as steel, copper, aluminum, and plastic.

Refurbished Electronics: There are now many companies that acquire used computers, repair and update them, and resell them at a much lower price. This is a great way to keep electronics out of landfills and make technology more affordable.

Donate Your Computer: If you are getting rid of your old computer because of a recent upgrade, consider donating it to charity. Many schools and non profit organisations are in need of computers. There are companies and businesses that will take your computer, refurbish it, and donate it to a needy cause. Make sure your computer is wiped clean of all information before donating it. Donating your computer helps the community and the environment.

We are fast becoming a technology dependent society. When it comes to protecting and conserving our environment, we have to adapt and change our technological practices to ensure a sustainable future. Recycling electronics is a great way help the planet.

Know that repairing a computer or laptop repair Toronto is not cheap, but it can be cheaper than having to replace the computer. If you run into these situations, you will need to hire a onsite computer repair service Toronto.

Online News Video Of A “green” fleet

BBC World News America

Goes to the Animals: Vibration and Noise Control

Noise and vibration control is an issue that is much more common than one might originally think. In fact, it can creep up in the most unlikely of places. A good case in point is animal lab environments. Indeed, ALN Magazine recently ran an article titled “Noise & Vibration Considerations for the Animal Lab Environment.” Therein, the publication pointed out, “In the lab animal facility setting, noise, sound, and vibration affect the life cycle, interaction, and behavior of animals.” However, because “the impact of noise, sound, and vibration is a largely undocumented factor in the research,” it’s an often overlooked issue.

“If the sound pressure levels get too high,” the article continues, “there is a negative impact on animals and structures.” Vibration control, however, is just as important to these animals as noise control in that it “is a driving force behind radiated sound.”

Obviously, exposure to noise and vibration can be detrimental to an animal’s hearing, but the risks don’t stop there. “Sound and vibration can [also] have a physical impact on animals.” Even more startling, “Smaller animals are more susceptible to the affects of sound and vibration over time and will adapt or adjust accordingly. In some cases, mutations may result from exposure to undesirable conditions.”

How can animal laboratories mitigate these problems? The magazine notes, “The designers can control items that are constant disturbances that may greatly impact the animal community. Items within the designer’s control include ventilation system design, machinery vibration isolation, wall construction, lighting selection, and computer terminal placement.”

During the design process, animal labs may want to consult with a producer of custom-molded rubber and rubber-to-metal bonded parts for noise and vibration control. A world leader in the creation of rubber molding and rubber-to-metal bonded parts can help to create an environment that is not only safe for the animals being kept there but is also conducive to a healthy work environment for the people who are employed there.

The Vibro-Insulator line of isolators and mounts, in particular, aid in the control of noise, vibration, and shock. Selecting the right type of mount for an individual animal lab’s specific applications can prove tricky, however. That’s why consultation with an expert with reputable qualifications in rubber molding and rubber-to-metal bonding can be very beneficial.

Of course, once professional advice has been obtained, browsing the Vibro-Insulator catalog allows animal labs easy navigation so they can select the correct mount for their application. Rubber Vibro-Insulators come in a variety of styles and sizes to handle most vibration isolation problems. Most of the mount styles are designed to be used in either the compression or shear direction.
Selection of the proper Vibro-Insulator for a specific application boils down to a multi-step mathematical function that an expert can calculate for the lab or into which the lab’s design team can plug the following information:

1. The maximum load that must be supported.
2. The number of mounts supporting the load.
3. The frequency of the disturbing vibration.
4. Any restrictions on the size or style of the mount based on space limitations or assembly considerations.

Carmen Fontana is a Web Services Manager for Western Reserve Internet Services. Karman Rubber is a world leader in vibration control.

Clean Green Engine Fox News

Clean Green Computing

Green and Clean Computing

Little thought may be given to the energy consumption of computers, but as more and more computers are purchased each year, it is not just the number of computers that forces increased energy consumption but the way in which computers are being used that adds to the building energy burden. Research has shown that most computer desktops are not being used a great deal of the time they are running and are left on for long periods of time. As with other forms of energy consumption, electricity is wasted when it is not being used and this burns fossil fuels that emit carbon dioxide into the air and cause smog, acid rain and other detrimental environmental side effects.

The typical desktop computer consists of a system unit which houses the central processing unit (CPU), a monitor and a printer. The CPU may require 100 watts of electrical power; the monitor, which may be 15 to 17 inches, may require another 50-100 watts; a laser printer can use as much as 100 watts or more while ink printers use as little as 12 watts while printing. The cost for operating a 200 watt system all day and night, everyday, would be $125 annually, while the cost of operation for normal business hours of 40 hours per week would range around $30 annually. Considering the tremendous benefits derived from using computers, this figure may not appear extensive, but when multiplied by the many computers used on a daily basis in this country, the total grows phenomenally.

There are many ways to reduce personal computer energy consumption. Computers, printers and monitors can be turned off when not in use. Many years ago, it was considered harmful to the computer if it were turned on and off periodically during the course of a day. However, the internal circuitry of personal computers is designed to be protected from power damages that might result from on and off switching. Doing so will not substantially affect the computer’s useful life.

The use of screen savers wastes energy and should not be used. They go back to the days when, if not used, images would be ingrained on screens if they remained on too long, but updates in technology have long made the use of screen savers unnecessary.

The United States Environmental Protection Agency has also developed technology for computers and monitors that can be programmed to automatically power down to a lower power state when not in use. This “sleep mode” can reduce energy consumption by 60% to 70% and these “Energy Star” computers serve to gain efficiency without any loss in computing performance.

Green computing extends beyond the personal computer to the use of related devices and materials. For example, paper waste can be reduced by printing as little as possible and only when necessary, recycling waster paper, using electronic mail instead of faxing to eliminate the need to produce a hard copy, and trying to print on both sides of the page when possible. In addition, printer and toner cartridges can be recycled. Although this is a practice that has been discouraged in the past by printer and toner cartridge manufacturers, such recycled cartridges save resources and reduce pollution and solid waste. Disposing of electronics as well can be done through recycling agencies to reduce waste and provide for recycling of functional equipment.

Finally, green computing also means not buying new equipment unless there is a real need for it. Close investigations can be made regarding upgrading hardware or software before purchasing a new computer. However, if the determination is made that a new computer system should be purchased, there are “Energy Star” computers, monitors and printers on the market. In addition, ink jet printers use 80% to 90% less energy than laser printers and soon, even “Green Computers” will reach the marketplace for sale.

Visit http://www.OCRuggedLaptops.com for more information about the rugged laptop industry.

Reduce - The Holy Grail

The hard truth is that we all need to reduce. Reduce the amount of money we spend. Reduce the amount of food we eat…and our waistlines. And reduce the amount of stuff we throw away. In fact new we look at the 3 R’s of reduce, reuse, recycle, they are actually in that order for a reason. It is a hierarchy for a reason and reduce is the Holy Grail. Put in its simplest terms reduce means that we use less of the earth’s resources and in any environmental scheme should be our first priority.

That said, it is also the hardest to accomplish. When I thought about all the things we do to be greener, the number of examples of reducing stumped me. I suppose the most obvious example of our efforts to reduce was the decision some months ago, not to purchase an automobile. My husband has the use of a company van, but even that is rarely used. The difficulty comes when we want to go anywhere as a family. The work van has only one bucket seat in the front that fits three people. Obviously this presents difficulties. Even on our Saturday shopping trips with my mother-in-law, I end up sitting in the back of van; a solution that is both dangerous and illegal for the children. About a year ago, when I was working full-time, we were seriously considering buying a vehicle. But in the end, we thought the expense was too much when you consider not just payments, but insurance, road tax, maintenance and gas. Instead, we signed up for StreetCar; a car rental scheme that you pay a monthly fee to join and an hourly or daily rate only when you need to use a car or van. Looking back, that was one of the best decisions we have made both for the environment and family finances.

The other obvious example I found of reduction was our decision a year ago to switch to bags for life. We now have a stack of them beneath our kitchen sink and faithfully use them for our Saturday shops. But I do admit to occasionally forgetting them when just running out to grab something quickly. When this happens though, we make certain to re-use (we’ll talk more about that tomorrow) any plastic bags we get for outings or for small bin liners. Did you know that in the UK alone 100,000 TONNES of plastic bags are thrown away each year; that is the equivalent of 70,000 cars? So if there is one thing, I can encourage you to do, it is purchase bags for life. My store sells the sturdy plastic ones for about forty pence, the jute ones are about a pound, and the pretty cloth ones are about three pounds with a portion of the proceeds going to charity. Or it is very simple to make your own if you sew.

Speaking of which, sewing and mending our clothes is another excellent way of reducing. My boys from my husband to my sons are always wearing holes in their jeans on the inside thighs. Before the economic downturn, I admit we were likely to just toss them out and purchase new ones. But since I have not been working, we have instead taken them to the drycleaners and had them patched. The cost of the repairs is less than the cost of purchasing new (although I am committed to mending them myself from now on…a further savings). And we have reduced in a very small way the demand for jeans.

Of course, as I sit at my desk in my bedroom I am witnessing another reduction…the daylight streaming in through the open curtains. One of the first things I do each morning is open the curtains and the blinds. By using natural light when and where possible, we are reducing the amount of electricity that we consume and that the power grids must generate. We are also of course saving money on our bills. My husband is a genius at this; going around and turning off and unplugging everything he can each night before bed. I admit though that being American this whole switch on the plug thing still gets me and I often forget to do that, but I am improving. Of course, another example was turning down our thermostat during the winter and wearing heavier layers of clothes instead. In fact, I can think of only a couple of days this winter when we turned our heat on before night fall at all.

These are just a few ideas of ways that our family is reducing. There are many other things that we and you can do to cut back on the things we consume and help save our earth’s precious resources. On Friday as I said, we will do a mini-inventory and I will commit to new ideas on how our family can better live the 3 R’s reduce, re-use, recycle. I will be especially focusing on reducing since this is the most important of the R’s.

Terri O’Neale is the mother of six; ranging in age from 3 to 22. She has been both a working and stay-at-home mother at various times in her life. She was also a single mother for almost five years, before re-marrying the love of her life at the age of forty. Obviously, she has a life-time of training in raising a family on a tight budget. In addition to these real life experiences, she possesses a bachelors degree in health education and a minored in environmental management in her masters programme.

Terri feels strongly that this is one of the most challenging times in history for the family, but she also believes that families with the will and resolve to address the pressing issues of saving money, becoming greener, leading healthier lifestyles and spending more time with one another can endure these challenging times and come out victorious in the end.

Through Frugal Family articles, blogs, videos and social networking, she helps modern families rediscover some lost art forms such as cooking, sewing, and gardening. The goal is not to go back in time or become fanatical, but to help all families find simple and effective ways that fit into their lifestyle to make moderate changes with huge impacts. For more information, check out her blog http://frugalfam.wordpress.com/.

Temple Mecca Black Stone

Greentech Media: First Solar's Gift to China: How to Build a Solar …

China is home to a bevy of solar panel and other components makers that have largely exported their goods to Europe, where hefty government incentives in recent years have turned countries such as Germany and Spain into the two top …

Small Business Labs: Solar Wins

Solar power is becoming a viable, price competitive clean energy source for many applications. And although we will continue to need large power plants fired by coal, natural gas or nuclear energy for many more years, …

Google may take lead in solar tech — DailyFinance

One would expect advances in solar technology to come from established solar energy companies like First Solar (FSLR). But Google’s (GOOG) green initiative may outpace the major industry leaders by creating much more efficient …

Solar Tree Recharging Device by Jun-Se Kim, Min-Goo Kim & Dong-Eon …

With all these solar ideas, I’m getting a really strong impression that people don’t actually know how little power you get off these things. You’d be hard-pressed to do much better than keep a gadget at power-usage neutral in standby …

Google Cites Progress on Thermal Solar « Data Center Knowledge

Google (GOOG) says it is developing solar thermal power mirrors that could improve on current technology, making utility-scale solar power generation more cost-effective.